cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
511
Views
0
Helpful
1
Replies

Link Utilization with Ciscoworks LMS 3.1

hipohoneywell
Level 1
Level 1

Hi all,

Is it posible to see the link utilization on a router's serial interface with LMS 3.1?

If yes, please explain.

Thanks

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

Yes. You can use the Health and Utilization Monitor plug-in module to do this. HUM ships as a 90-day eval along with LMS 3.1.

To do this in HUM, you would need to create an Interface Utilization poller under HUM > Poller Management.

View solution in original post

1 Reply 1

Joe Clarke
Cisco Employee
Cisco Employee

Yes. You can use the Health and Utilization Monitor plug-in module to do this. HUM ships as a 90-day eval along with LMS 3.1.

To do this in HUM, you would need to create an Interface Utilization poller under HUM > Poller Management.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: