Billing for above the CIR bandwidth

Unanswered Question
May 6th, 2009

we are MPLS service provider, we need to deploy new services that when our customer bursting above the CIR we need to charge them for that bursting , we have CE to PE links like 10 M, SO so we are not using dial up or dsl links between the CE and PE , how we can do that billing and what the components required.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
abakhashwin Wed, 05/06/2009 - 12:13

i want to know how it will be used with what software and may be to enable netflow it will make high utilization in the PE.

I Want to know how we gona use the netflow

Collin Clark Wed, 05/06/2009 - 12:19

The router reports flows to a netflow application that resides on a server. The software can then calculate the 95% and you can bill off of that number. Netflow has low overhead.

abakhashwin Wed, 05/06/2009 - 12:23

do you know what kind or name of this application, this application will be used by MPLS service provider for all the enterprise customers, i appreciate also if you can provide me how this things will work or to be configure.




This Discussion