05-06-2009 09:49 AM - edited 02-21-2020 03:26 AM
we are MPLS service provider, we need to deploy new services that when our customer bursting above the CIR we need to charge them for that bursting , we have CE to PE links like 10 M, SO so we are not using dial up or dsl links between the CE and PE , how we can do that billing and what the components required.
05-06-2009 10:46 AM
I would use Netflow. You can find more information in the link.
http://www.cisco.com/en/US/tech/tk812/tsd_technology_support_protocol_home.html
Hope that helps.
05-06-2009 12:13 PM
i want to know how it will be used with what software and may be to enable netflow it will make high utilization in the PE.
I Want to know how we gona use the netflow
05-06-2009 12:19 PM
The router reports flows to a netflow application that resides on a server. The software can then calculate the 95% and you can bill off of that number. Netflow has low overhead.
05-06-2009 12:23 PM
do you know what kind or name of this application, this application will be used by MPLS service provider for all the enterprise customers, i appreciate also if you can provide me how this things will work or to be configure.
Regards,
Ahmed
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: