05-06-2009 09:49 AM - edited 02-21-2020 03:26 AM
we are MPLS service provider, we need to deploy new services that when our customer bursting above the CIR we need to charge them for that bursting , we have CE to PE links like 10 M, SO so we are not using dial up or dsl links between the CE and PE , how we can do that billing and what the components required.
05-06-2009 10:46 AM
I would use Netflow. You can find more information in the link.
http://www.cisco.com/en/US/tech/tk812/tsd_technology_support_protocol_home.html
Hope that helps.
05-06-2009 12:13 PM
i want to know how it will be used with what software and may be to enable netflow it will make high utilization in the PE.
I Want to know how we gona use the netflow
05-06-2009 12:19 PM
The router reports flows to a netflow application that resides on a server. The software can then calculate the 95% and you can bill off of that number. Netflow has low overhead.
05-06-2009 12:23 PM
do you know what kind or name of this application, this application will be used by MPLS service provider for all the enterprise customers, i appreciate also if you can provide me how this things will work or to be configure.
Regards,
Ahmed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide