DEVICE_TARGET_ABORT_IND message received from Peripheral(5000)

Unanswered Question
May 6th, 2009

Agent is going to reserve state when call arrives and calls is disconnecting.

CSS/partition are there

We have a setup with follwing components...

icm - 7.2 (duplexed)

cucm - 6.1 ( cluster of 3, 1 pub & 2 sub )

cVP - 7.0 (load balancing)

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
prakashj Wed, 05/06/2009 - 22:50

The following error i got from CVP

17:22:46 Trace: DEVICE_TARGET_ABORT_IND message received from Peripheral(5000) CRSCallID(Date 149144 ,ID 696), NetworkTarget(5000),MRDomain(1), Agent(5009).

17:23:46 Trace: DEVICE_TARGET_ABORT_IND message received from Peripheral(5000) CRSCallID(Date 149144

prakashj Wed, 05/06/2009 - 22:51

sorry earlier message was from ICM and the below error from CVP

7:12:29 Trace: 00000012: CALLFLOW: IP transfer - Agent hung up : DNIS = 7001234567152 : GUID = 2F9064F80304001F20345DD2A3A0591F : CID = 9FE79F26397F11DE83D10022915807EC

17:12:29 Trace: 00000012: CALLFLOW: Call ended : DNIS = 7001234567152 : GUID = 2F9064F80304001F20345DD2A3A0591F : CID = 9FE79F26397F11DE83D10022915807EC

17:12:29 Trace: 00000011: CALLFLOW: Call successfully established (slow start) : DNIS = 8881 : CID = 9FE79F26397F11DE83D10022915807EC

17:12:31 Trace: 00000011: CALLFLOW: Disconnecting caller because agent hung up. : DNIS = 8881 : CID =

csshenoy80 Wed, 05/06/2009 - 23:32

The error seems to be when the CVP is trying to transfer the call to the IP Phones, the CVP is not able to reach the partition of the CUCM IP Phones.

Check the Call Search Spaces.

Does your setup include Gatekeeper.

Actions

This Discussion