6509 in native mode IOS w/ 6148-45AF modules

Answered Question
May 7th, 2009

Hello.

I have a WS-C6509 core switch running in hybrid mode (software revisions SP: BTSYNC_cat6000-sup2k8.8-3-6.bin, RP: c6msfc2-dsv-mz.121-27b.E1.bin) that I would like to upgrade to native mode IOS revision c6sup22-dsv-mz.121-27b.E4.bin. The core switch has the following modules installed:

WS-X6K-SUP2-2GE w/ WS-F6K-MSFC2 & WS-F6K-PFC2

WS-X6408A-GBIC

WS-X6148-45AF w/ WS-F6K-FE48-AF

WS-X6348-RJ-45

WS-X6348-RJ-45

WS-X6348-RJ-45

WS-X6348-RJ-45

WS-X6148-45AF w/ WS-F6K-FE48-AF

I would like to confirm that the WS-X6148-45AF modules will function in a 6509 running in native mode with the above mentioned IOS revision.

BTW, my SP has RAM/Flash of 128/32 and my RP has RAM/Flash of 128/16.

I have this problem too.
0 votes
Correct Answer by Edison Ortiz about 7 years 8 months ago

Based on the Release Notes, it seems the support began with 12.2(17d)SXB on Sup2

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/release/notes/OL_4164.html#wp3366098

HTH,

__

Edison.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.

Actions

This Discussion