Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
333
Views
5
Helpful
1
Replies

Translation rules on gateway with mgcp controlled E1

acerda
Level 1
Level 1

‎05-07-2009 09:25 AM - edited ‎03-15-2019 05:54 PM

Hi All

I would like to know if is possible build a translation route to a voice interface that for all traffic that is comming with a size of 8 (XXXXXXXX) digits put in front a 09, I know that a Gateway MGCP is controlled by Callmanager I could manage digits with the parameters ''prefix DN'' on inbound calls in the call routing information but this parameters I will put a digit 9

So that way any inbound number (caller id) I will put in front the 9 for do a redial feature.

Please your suggest

Andres

Labels:
0 Helpful
1 Reply 1

chadlincoln
Level 3
Level 3

‎05-07-2009 10:03 AM

You cannot do this if it is MGCP controlled. All control is done on through the gateway configuration on the UCM.

Please rate if this helps.

Customers Also Viewed These Support Documents