WGB Config in in LWAPP Environment

Unanswered Question
May 7th, 2009
User Badges:

Hi All, i tried to configure a WGB (1252, 1242, both Autonomous) to work in an LWAPP Environment. I know the Configuration Examples and the Config Guide. I dont trust in WEP and TLS doesnt work instead the Customer has no PKI implemented so far. Can anybody help me with a working LEAP or EAP-FAST based Configuration? Is PSK supported? Regards, Michael

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ldardon Sun, 05/17/2009 - 19:10
User Badges:

Open authentication with WEP is NOT a secure method for authenticating devices. Cisco recommends that you use advanced authentication methods, such as WPA+TKIP, WPA2+AES, EAP-FAST, and EAP-TLS authentication, in order to secure the WLAN. WGB supports Open, WEP, CKIP, WPA+TKIP, WPA2+AES, LEAP, EAP-FAST,Local EAP and EAP-TLS authentication modes. This document uses Open with WEP only for simplicity.

MICHAEL SCHROEDER Sun, 05/17/2009 - 23:22
User Badges:

This is exactly what i mean, WEP is not secure. I'm looking for a working WGB configuration with EAP-FAST or maybe LEAP as authentication method. How does a WGB learn and accept the PAC?


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode