CME Outbound Caller ID

Answered Question
May 8th, 2009
User Badges:

Hello All,



I know we can do this in CM but checking for CME. on a PRI we want to show outbound caller ID as 1 of 3 or 4 masking numbers for some phones and no number show at all for other phones.


Possible in CME?



Thanks in advance! All replies rated.

Correct Answer by Brandon Buffin about 7 years 10 months ago

You can use the following command to block caller ID:


ephone-dn 1

block caller-id


You can use translation rules to send out varying caller ID, such as:


voice translation-rule 1

rule 1 /1000/ /1234567890/

rule 2 /2000/ /1235551212/


voice translation-profile 1

translate calling 1


voice-port 0/1/0:23

translation-profile outgoing 1


Hope this helps.


Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Brandon Buffin Fri, 05/08/2009 - 07:44
User Badges:
  • Purple, 4500 points or more

You can use the following command to block caller ID:


ephone-dn 1

block caller-id


You can use translation rules to send out varying caller ID, such as:


voice translation-rule 1

rule 1 /1000/ /1234567890/

rule 2 /2000/ /1235551212/


voice translation-profile 1

translate calling 1


voice-port 0/1/0:23

translation-profile outgoing 1


Hope this helps.


Brandon

Actions

This Discussion