Standby Group conflict with the Virtual Blade NIC

routeinet · ‎05-08-2009

I'm running oe574-4.1.3.55 on a WAE574, I've created Standby Group 1 but when I tried to map the virtual-blade to the NIC it failed with following error:

GigabitEthernet 1/0 is part of an Standby group. To use this interface in a virtual blade, it must be removed from

the Standby group.

Is it not possible to use "standby group" with the virtual-blade ?

wong34539 · ‎05-17-2009

When you configure the virtual blade network interface card emulation in WAAS version 4.1.1c or 4.1.1d, you can select E1000 (an Intel E1000 NIC emulator) in addition to the rtl8139 and virtio emulators.

For more information on mapping the Virtual -blade to the NIC, please follow up on this link:

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v411/release/notes/ws411rn.html#wp64158