05-09-2009 05:21 AM - edited 03-18-2019 11:01 PM
I have the following CD image 7.0.2.10000-18_recovery.iso. I would like to install this on a VMWare workstation version 5.5.x. This is what I will setup:
- create a new virtual machine with 2GB RAM and 80 of HDD
- choose Redhat Enterprise Linux ES 3,
- go through the installation as suggested by other in this forum,
Will that work? My system is Intel based system, Dell PowerEdge 2850.
Does CUCM version 7.0.2 installed on VMWware comes with a 50 user license?
Thanks in advance.
05-09-2009 08:21 AM
You need to get in 1st place a full version of CUCM, that's the recovery CD available from CCO and it's not install media
Using the Disaster Recovery Disc
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/7_0_1/upgrd701.html#wp51549
There is no install bootable media available to download, you need to order the actual physical media
HTH
java
if this helps, please rate
05-09-2009 10:11 AM
Thank you for your feedback.
Let say that I have a full 6.1.1 iso image. Will it work with the method I described above?
Thank you very much for your assistance
05-09-2009 11:36 AM
ya...go through the installation as mount the iso image as a cddrive...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide