cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
288
Views
0
Helpful
2
Replies

Ethernet Link - Problem

gopinath.j
Level 1
Level 1

Hi All,

I have two ethernet links connected on a single router.I am using PBR(source based) on my router.

issue:- ethernet interface line protocol is not going down on my router even if the service provider media down.Reason-Its a ethernet link.

Give me some tips - Any failure on the service provider media, my router should understand and work with my policy.

Configuration attached.

2 Replies 2

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Gobinath,

you need to combine PBR with object tracking to verify effective next-hop reachability (an automated ping test that tells you when the link is not working anymore)

see

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtpbrtrk.html

Hope to help

Giuseppe

Hi Giuseppe,

Thanks a lot. I tried this in my test bench and it is working fine.This week end I will apply on my production router.

Thanks!!!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco