05-10-2009 01:07 PM - edited 03-18-2019 11:01 PM
hi all,
can any tell me how to integrate nortel phones with CCM 6.X .. can any one have share guide ????
Regards
06-08-2009 12:57 AM
any one......please help
06-08-2009 01:58 AM
Hello,
Don't have a guide, but if you have a 11XX Nortel series phone, you can change the firmware to a sip one and then try to register to CCM as a third party sip phone.
Hope this helps
06-08-2009 08:47 AM
I think your audience might need more information on the type of integration you are hoping for in order to help you. Are you keeping the Nortel PBX and want to dial between Nortel and CallManager (PBX integration) Are you wanting to run the Nortel phones on CallManager?
06-08-2009 11:03 AM
I want to know more about to run the Nortel phones on CallManager
06-08-2009 10:05 PM
Good news. It seems you are going to Cisco. Take a look at nortel documentation I think you should have, and change using an tftp sever the 11XX series firmware to a sip firmware. Then try to join the SIP Nortel Phone to Call Manager using an standar SIP profile in Call Manager.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide