cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
394
Views
0
Helpful
2
Replies

CRASH EDWAAS BOX

felix.ebahi
Level 1
Level 1

I noticed that my cisco waas box (wae-512-k9) has crashed and all efforts to restore it has proved abortive. I have copied some error messages to help in determining what the problem might b. Besides that it is obvious that the disks on the device has failed is there another way to restore the box besides the procedures in the config guides?

ERRORS

No directory /local/local1/./!

Logging in with home = "/".

System is initializing. Please wait...

Please use 'show disks details' to monitor system status.

Disk based software not installed.

Some applications may not run correctly!

NO-HOSTNAME(config-if)#ip add

sh: /ruby/bin/assign_interface_irqs.pl: /usr/bin/perl: bad interpreter: No such file or directory

NO-HOSTNAME(config-if)#

NO-HOSTNAME#sh disks details

Physical disk information:

disk00: Not present or not responding

disk01: Not present or not responding

Mounted file systems:

MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%

No RAID devices present.

System is initializing. Please wait...

Disk encryption feature is disabled.

2 Replies 2

Daniel Laden
Level 4
Level 4

Physical disk information:

disk00: Not present or not responding

disk01: Not present or not responding

Sounds like you have disk failures.

-Dan Laden

Hi Dan,

The waas device has been working without physical hard disks in any of the two SATA slots. If a standard SATA2 hdd is inserted in any of the slots will reinstall succeed? As long as the device is supposed to support a standard SATA2 hdd I believe it should. Right?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: