cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
342
Views
0
Helpful
3
Replies

Connection limiting on ASA

raimj
Level 1
Level 1

I have ASA 5510. I am letting my outside customers on FTP on my server (port range 49152 65535)

Is it possible to limit the number of connections from one particular source address (My customer).

Thanks,

Manny

3 Replies 3

John Blakley
VIP Alumni
VIP Alumni

Manny,

You should be able to lock your customer down in your ftp server. I don't believe you're going to be able to do this in the ASA.

HTH,

John

HTH, John *** Please rate all useful posts ***

I was looking at config guide. Don't you think this will do the trick..

ASA(config-pmap-c)# set connection {[conn-max n] [embryonic-conn-max n] [per-client-embryonic-max n]

I looked at that option, and it's really hard to say if that's outbound or inbound, or if it can be either. I've never used that option. It's a possibility that you could create an acl, match that acl in a class map, apply the class map to a policy map, and then set the connection limit that would only affect the host that you're wanting to affect.

HTH,

John

HTH, John *** Please rate all useful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: