cme sip to sip phone won't call

Unanswered Question
May 11th, 2009
User Badges:

Hi,


im trying to build a cme with a few sip phones and sccp phones...


However there are two sip phones registered and one sccp phone..


i can call from the sip phones to the sccp phone but not the other way..

it's also not possible to call from sip to sip phone...did i forget something??


my config is:


voice service voip

allow-connections h323 to sip

allow-connections sip to sip

redirect ip2ip

sip

bind control source-interface FastEthernet0/0

registrar server expires max 1500 min 500

!

voice register global

mode cme

source-address 172.16.250.253 port 5060

max-dn 10

max-pool 10

!

voice register dn 1

number 101

!

voice register dn 2

number 102

!

voice register pool 1

id mac XXXX.XXXX.XXXX

number 1 dn 1

dialplan 1

username test password test

!

voice register pool 2

id mac XXXX.XXXX.XXXX

number 1 dn 2

dialplan 1

username test2 password test2

!

ephone 1

mac-address XXXX.XXXX.XXXX

type 7940

button 1:1

!

ephone-dn 1 dual-line

number 100


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
kennis1977 Tue, 05/12/2009 - 09:32
User Badges:

Ok....im a little bit further...


my sip phone is now registered.....


However now getting a error:


Warning: 304 172.16.250.253 "Media Type(s) Unavailable"


whats this...??? find it with sip debugging...


Thanks

kennis1977 Tue, 05/12/2009 - 09:34
User Badges:

ah....found it....codec problem...!!!!


yeah...finally i can make a call!!


thanks anyway....

Actions

This Discussion