05-11-2009 11:13 AM - edited 03-15-2019 05:57 PM
Hi,
im trying to build a cme with a few sip phones and sccp phones...
However there are two sip phones registered and one sccp phone..
i can call from the sip phones to the sccp phone but not the other way..
it's also not possible to call from sip to sip phone...did i forget something??
my config is:
voice service voip
allow-connections h323 to sip
allow-connections sip to sip
redirect ip2ip
sip
bind control source-interface FastEthernet0/0
registrar server expires max 1500 min 500
!
voice register global
mode cme
source-address 172.16.250.253 port 5060
max-dn 10
max-pool 10
!
voice register dn 1
number 101
!
voice register dn 2
number 102
!
voice register pool 1
id mac XXXX.XXXX.XXXX
number 1 dn 1
dialplan 1
username test password test
!
voice register pool 2
id mac XXXX.XXXX.XXXX
number 1 dn 2
dialplan 1
username test2 password test2
!
ephone 1
mac-address XXXX.XXXX.XXXX
type 7940
button 1:1
!
ephone-dn 1 dual-line
number 100
05-12-2009 09:32 AM
Ok....im a little bit further...
my sip phone is now registered.....
However now getting a error:
Warning: 304 172.16.250.253 "Media Type(s) Unavailable"
whats this...??? find it with sip debugging...
Thanks
05-12-2009 09:34 AM
ah....found it....codec problem...!!!!
yeah...finally i can make a call!!
thanks anyway....
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: