ERROR: mapped-address conflict

Unanswered Question
May 12th, 2009

When I try to add a second PAT statement I get the following ERROR:

ERROR: mapped-address conflict with existing static

inside:A.B.C.D to outside:DEVICE 1_Public netmask

The existing config is:

static (inside,outside) tcp DEVICE 1_Public https DEVICE 1_Private 8443 netmask

static (inside,outside) tcp DEVICE 1_Public ssh DEVICE 1_Private ssh netmask

static (inside,outside) DEVICE 1_Public DEVICE 1_Private netmask

I'm trying to add

static (inside,outside) tcp DEVICE 1_Public 44324 DEVICE 1_Private 44324 netmask

Why can I not add this new line?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
John Blakley Tue, 05/12/2009 - 05:47

I'm guessing that it's because you have a one-to-one mapping already:

static (inside,outside) DEVICE 1_Public DEVICE 1_Private netmask

Take the above line out, and you'll be able to add your line. Or, you can remove all of the lines and leave the above line in, and then control access through acls.




This Discussion