05-12-2009 04:36 AM - edited 03-13-2019 06:20 PM
Hi,
Have the scheme: analog phone > PBX > H323-Voice-GW > CUCM6.
I have no access to voice gateway: it is under others' responsibility.
I need to trace what value H.225 SETUP contains using RTMT.
Please advice, which actions flow should I perform to accomplish this ?
Solved! Go to Solution.
05-12-2009 05:56 AM
Hi,
This:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml#calm
Please rate if it helps.
Best regards.
05-12-2009 04:39 AM
05-12-2009 05:56 AM
Hi,
This:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml#calm
Please rate if it helps.
Best regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide