05-12-2009 05:23 AM - edited 07-03-2021 05:35 PM
Hi All
How should I mount an AP-1131AG for the best coverage area? vertical(wall) , Horizontal(ceiling).
Thank you.
05-12-2009 05:29 AM
The 1131AG AP is meant to hang horizontally on the ceiling. The radiation pattern is an omnidirectional "donut", which extends out from the LED ring in the center.
Waaaaay at the bottom is a description of the 1131 radiation pattern.
05-31-2009 12:37 AM
Thank you. Jeff
From the E-Plane radiation ,Can I mount on the wall ?. or If I mount on the middle of room (Vertical ) what is the effect?
Thanks you.
KO
05-31-2009 05:19 AM
You can hang it on the wall. The effect will be to change the polarity of the pattern by 90 degrees (to horizontal), which may or may not be detrimental, depending on the client.
Usually you'd be looking at ~3dB or so drop for a polarization mismatch.
Good Luck
06-01-2009 04:46 AM
Hi Scott,
Thank you for your advice.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide