Mobile Connect on BRI is not supported but why?

Unanswered Question
May 12th, 2009

Hi,

actually I'm trying to configure Mobile Connect on BRI Ports, I know from this document, that it does not work:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/mobilapp.html#wp1043943

Having a look on the MGCP controlled BRI port:

May 12 14:39:57.392: ISDN BR0/0/1 Q931: TX -> SETUP pd = 8 callref = 0x18

Sending Complete

Bearer Capability i = 0x9090A3

Standard = CCITT

Transfer Capability = 3.1kHz Audio

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x8A

Exclusive, B2

Progress Ind i = 0x8083 - Origination address is non-ISDN

Calling Party Number i = 0x0081, '01'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x80, '017662032618'

Plan:Unknown, Type:Unknown

May 12 14:39:57.520: ISDN BR0/0/1 Q931: RX <- CALL_PROC pd = 8 callref = 0x98

Channel ID i = 0x8A

Exclusive, B2

ver.vgw2#

May 12 14:40:03.936: ISDN BR0/0/1 Q931: RX <- ALERTING pd = 8 callref = 0x98

ver.vgw2#

May 12 14:40:06.488: ISDN BR0/0/1 Q931: RX <- CONNECT pd = 8 callref = 0x98

Date/Time i = 0x09050C1026

Date (yr-mm-dd) = 09-05-12

Time (hr:mnt:sec) = 16:38:174

ver.vgw2#

May 12 14:40:15.656: ISDN BR0/0/1 Q931: RX <- DISCONNECT pd = 8 callref = 0x98

Cause i = 0x8090 - Normal call clearing

Progress Ind i = 0x8288 - In-band info or appropriate now available

I can clearly see the connect and disconnect messages. Does anyone know why? Has someone tried to get it working with H323?

This question is more out of interest. Any answer or idea is very much appreciated.

Cheers

Christian

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
c.hennrich Wed, 05/13/2009 - 01:34

I configured H323 and now I'm able to use Mobile Connect on BRI Ports.

Cheers

Actions

This Discussion