cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
640
Views
0
Helpful
1
Replies

WLC 526 - 5.2.157.0 local eap

lukas.sura
Community Member

hi all,

For customer solution, I tried use WLC 526 with 5.2.157.0 (in release notes, local eap mentioned as new funkcionality, but when I configured it by WLC release 5.0 configuration guide - it doesnt work.

from sh wlan <ID> command i always see that,

Local EAP Authentication......................... Disabled

and CLI command (config wlan local-auth enable profile_name wlan_id) cannot be used and on GUI for that WLAN, enabling local eap is missing...

I also tried fw: 5.2.178.0 with same result

Any advice ??? Maybe BUG (not find)???

Thanks

LUKAS

1 Reply 1

aghaznavi
Level 5
Level 5

Ensure you have created the correct profile. Use this document to Configure Local EAP on the WLC.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.shtml#wlc

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: