netflow destination AS empty

Unanswered Question
May 13th, 2009
User Badges:


Dear All,


pls help


when i want to create report of traffic which is going out of my network,it seems in the netflow analizer report with destnation AS empty. (using manage engine analyzer7 professional plus trialversion)



Cisco 6509 config


interface port-channel 2

ip route-cache flow.



ip flow -export source loopback 0

ip flow -export version 5 orgin-as

ip flow -export destination x.x.x.x 9996



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Wed, 05/13/2009 - 08:14
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Aruldaspr,

on a C6509 you need to configure also NDE export because it is a multilayer switch and real traffic is processed by PFC


see


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/nde.html#wp1140493


Additional NDE Fields


You can configure NDE to populate the following additional fields in the NDE packets:


•IP address of the next hop router


•Egress interface SNMP ifIndex


•BGP AS



Hope to help

Giuseppe

Actions

This Discussion