05-13-2009 07:30 AM
Hi,
we use a lot of accesspoints AIR-AP1231G-E-K9 and I want to generate an inventory report of theese devices.
OID: .1.3.6.1.4.1.9.1.525
But some of the devices are not shown valid (screenshot), others are right.
The IOS is the same on all devices.
The only difference is the Top Revision Number:
False devices: B0
Right devices: A0
Is there a issue with the device package? I installed the latest versions, but it doesn't work.
Thanks a lot!
Solved! Go to Solution.
05-14-2009 08:45 AM
The fix was to properly read correct values from the hardware based on the version, so it is entirely possible one board rev is fine while another is not.
It looks like the fix was also integrated into 12.3(8)JEC which you may be able to move to.
05-13-2009 08:41 AM
This looks like bug CSCsj13648. It is fixed in 12.4(10b)JA.
05-14-2009 12:12 AM
Thanks for your reply!
Is it right, that we have the problem with the IOS c1200-k9w7-mx.123-8.JA2 in context with the special Top Revision Number "B0"?
Because other accesspoints work fine with the same IOS.
Because an update is not possible I have to live with this fault....
05-14-2009 01:47 AM
05-14-2009 08:45 AM
The fix was to properly read correct values from the hardware based on the version, so it is entirely possible one board rev is fine while another is not.
It looks like the fix was also integrated into 12.3(8)JEC which you may be able to move to.
05-18-2009 07:51 AM
I found a accesspoint to test the 12.3(8)JEC and it works!
Thanks for your response, Joe!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: