Multilink with QoS

Unanswered Question
May 13th, 2009
User Badges:

Not sure if this is under the right spot or not ...

I have a PPP multilink running on 3845's. There are 3 T-1's in the multilink, and under the multilink interface a service policy is set. On the serial interface configurations, the fair-queue option is there. My questions is, is this option negating the service policy, or should the service policy output command be under every serial interface in the multilink? thanks for any help.

sample config:

interface Multilink5

ip address x.x.x.x x.x.x.x

ppp multilink

ppp multilink group 5

service-policy output test

interface Serial0/1/0

no ip address

encapsulation ppp


ppp multilink

ppp multilink group 5

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jon Marshall Wed, 05/13/2009 - 10:02
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN


The service-policy should be applied to the multilink interface and not to each individual physical interface so your setup is correct.


derek.leonard Wed, 05/13/2009 - 10:04
User Badges:

Thanks Jon. So the fair-queue command on the serial interfaces is not negating anything?


This Discussion