05-13-2009 11:08 AM - edited 03-04-2019 04:45 AM
Servus,
we have some trouble with copper sfp's in a 7604 with sip-400 and SPA-5X1GE-V2 or 7600-ES20.
We tried some other sfp's but the link on the 7604 is still down. We don't have the problem with fiber sfp's.
Negotiation cannot be configured on the interface,
Any ideas?
André
Solved! Go to Solution.
05-13-2009 11:22 AM
André
You need SFP-GE-T, according to the release notes, I don't see GLC-T listed for support under SPA-5X1-GE-V2
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1327217
HTH,
__
Edison
05-13-2009 11:22 AM
André
You need SFP-GE-T, according to the release notes, I don't see GLC-T listed for support under SPA-5X1-GE-V2
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1327217
HTH,
__
Edison
05-13-2009 11:26 AM
Hi Edison,
we use glc-t sfp's , ios is 12.2(33)SRC3
André
05-13-2009 11:29 AM
André,
Sorry for asking for the SFP model, you included that information on the subject.
I've updated my previous reply.
__
Edison.
05-13-2009 11:45 AM
hi edison,
thank you for your fast response. You're right, GLC-T is only supported for the rsp but not for spa's or es20 :(. I guess we don't have a chance to get the glc-t's working right ?
André
05-13-2009 11:52 AM
André
That is correct. You need to purchase the SFP I mentioned above for the ES20 and SPA module.
HTH,
__
Edison.
05-13-2009 11:59 AM
Hi Edison,
Yes, your information was very helpful. Thank you again for that.
André
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: