cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1587
Views
5
Helpful
6
Replies

GLC-T not working with SPA-5X1GE-V2 or ES20 in 12.2(33)SRC3

aeggers
Level 1
Level 1

Servus,

we have some trouble with copper sfp's in a 7604 with sip-400 and SPA-5X1GE-V2 or 7600-ES20.

We tried some other sfp's but the link on the 7604 is still down. We don't have the problem with fiber sfp's.

Negotiation cannot be configured on the interface,

Any ideas?

André

1 Accepted Solution

Accepted Solutions

Edison Ortiz
Hall of Fame
Hall of Fame

André

You need SFP-GE-T, according to the release notes, I don't see GLC-T listed for support under SPA-5X1-GE-V2

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1327217

HTH,

__

Edison

View solution in original post

6 Replies 6

Edison Ortiz
Hall of Fame
Hall of Fame

André

You need SFP-GE-T, according to the release notes, I don't see GLC-T listed for support under SPA-5X1-GE-V2

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1327217

HTH,

__

Edison

Hi Edison,

we use glc-t sfp's , ios is 12.2(33)SRC3

André

André,

Sorry for asking for the SFP model, you included that information on the subject.

I've updated my previous reply.

__

Edison.

hi edison,

thank you for your fast response. You're right, GLC-T is only supported for the rsp but not for spa's or es20 :(. I guess we don't have a chance to get the glc-t's working right ?

André

André

That is correct. You need to purchase the SFP I mentioned above for the ES20 and SPA module.

HTH,

__

Edison.

Hi Edison,

Yes, your information was very helpful. Thank you again for that.

André

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco