NM-16ESW Solution

Answered Question
May 13th, 2009
User Badges:

Need to find out if this solution will work.

I want to install a NM-16ESW into a 2811 ISR. I would like to configure 16 individual VLAN interfaces and assign each physical port to one of the VLANs.

Will the router/module support that number of VLANs? Each VLAN interface will have it's own IP address in a separate network. Will I be able to successfully route between all of the different subnets using EIGRP?

Thanks.

Correct Answer by Edison Ortiz about 8 years 2 weeks ago

You can configure up to 256 Vlans. Your proposed design will work.


HTH,


__


Edison.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Edison Ortiz Wed, 05/13/2009 - 14:05
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

You can configure up to 256 Vlans. Your proposed design will work.


HTH,


__


Edison.

Actions

This Discussion