QoS Service Policy Not Being Taken by GRE Tunnel Interface

Unanswered Question
May 14th, 2009
User Badges:

I've created a nested QoS policy shaping traffic to 1 Gb/s on an interface forcing certain traffic to a priority of 66000 to use that pipe with the assumption that all other traffic will use best effort. I can see the commands pop up when typing them on a GRE tunnel interface but I get an error stating that the policy is not supported on input or output on the interface. Is that a license thing? Why can I type the commands but have the commands fail on a GRE tunnel interface? It is on a 6500 running sup72033-adventerprisek9_WAN-mz.122-18.SXF9.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vmiller Thu, 05/14/2009 - 08:11
User Badges:
  • Gold, 750 points or more

Did you try putting on the tunnel source interface or the tunnel itself ?

mlenco Thu, 05/14/2009 - 09:56
User Badges:

I put the commands on the tunnel interface not the tunnel's source interface. The commands show up with a ? on the tunnel interface but fail so I assume it is reasonable to put it on the tunnel interface, until I got the error. Will the commands work on the tunnel's source interface if it won't work on the tunnnel interface itself?

vmiller Thu, 05/14/2009 - 12:21
User Badges:
  • Gold, 750 points or more

try the source interface (It can't hurt).

I'm speculating here, but i suspect that

since the tunnel is a logical rather than phsical thats where the issue lies. Sorry about the double post


vmiller Thu, 05/14/2009 - 08:11
User Badges:
  • Gold, 750 points or more

Did you try putting on the tunnel source interface or the tunnel itself ?

Actions

This Discussion