Dedicate E1 Channels for Inbound/Outbound

Unanswered Question
May 14th, 2009
User Badges:

Hi


With a fractional PRI of 8 Channels, is it possible to dedicate 4 channels for Incoming only and 4 channels for outgoing only.


The Voice Gateway used would be 3845, with IOS version 12.4.


Can this be achieved using CUCM v7.


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ivillegas Wed, 05/20/2009 - 07:47
User Badges:
  • Silver, 250 points or more

On E1R2 signaling, you need to configure 2 ds0-groups on the controller E1. By doing this, you will have 2 voice ports. Use one for inbound calls and the other one for outbound calls by matching numbers on the destination pattern and associate that call with the outbound voice port number.

csshenoy80 Thu, 05/21/2009 - 10:25
User Badges:

Also, can we have 4 Channels dedicated for 4 IP Phones only, such that no other overflow call comes on these 4 channels.


Thanks.

Actions

This Discussion