Segregate WLAN to specific AP's?

Unanswered Question
May 14th, 2009
User Badges:

Hi,


I'm using a 4404 WLC with 1131AG LWAPP's and I was wondering if there is a way to create a WLAN and have it only broadcast from specific APs?


I'm testing a new Wireless configuration but I don't want the WLAN going out across all of our AP's, just a select few in my own office.


Thanks!


Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Thu, 05/14/2009 - 15:52
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Yes you can. It's call AP Groups.


Wireless > Advanced > AP Groups.

rcoote5902_2 Fri, 05/15/2009 - 06:14
User Badges:

I'm running 5.1.151 - which means if I want to run a specific WLAN on say - 5 radios I have to turn it off in 95? (twice that if I have to disable it for both b/g and a)???


Seems an upgrade to 5.2 would make this easier with AP Groups. Would that be a correct assumption?

Leo Laohoo Sat, 05/16/2009 - 17:09
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

You can use WLAN Override, as what the previous post suggest. If want to risk it, you can upgrade to the latest version and use the AP Groups function. Whatever the decision is/will be, you'll wind up with the same result.


This will allow you to, say, to have five LAP to have a unique SSID while the others don't.


Hope this helps.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode