ways of load balancing to WAN

Unanswered Question
May 15th, 2009
User Badges:

Hi all, if I wanted to load balance traffic out of my wan using 2 routers, how would this be done, I know that they routing protocol will load balance but how would I send the traffic to the 2 routers,

are the 2 options, 2 static equal cost routes, and glbp?


cheers


Carl

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3.5 (2 ratings)
Loading.
cisco_lad2004 Fri, 05/15/2009 - 03:12
User Badges:
  • Gold, 750 points or more

Equal path routing and GLBP would both achieve what you want.


Etherchannel is also an option.


HTH


Sam

jgreenwoodii Fri, 05/15/2009 - 10:19
User Badges:

Maybe I'm reading to much into the question but curious if you have 2 WAN circuits terminating on 2 individual routers or is the topology using 2 routers connected to a Single Wan Router?



jgreenwoodii Fri, 05/15/2009 - 10:19
User Badges:

Maybe I'm reading to much into the question but curious if you have 2 WAN circuits terminating on 2 individual routers or is the topology using 2 routers connected to a Single Wan Router?


Jonathan

Actions

This Discussion