05-15-2009 05:03 AM
Dear all,
we would like to monitor several ressource usages on our ACE module,
but didn't have much luck so far. In particular we want to have MRTG graphs for :
* CPU usage
In MRTG we tried "Target[lb-admin-cpu]: 1.3.6.1.4.1.9.9.109.1.1.1.1.7&1.3.6.1.4.1.9.9.109.1.1.1.1.8:community@lb-admin", but it does not graph anything. Are the OIDs not correct ?
* Memory Usage
How is this possible ? Which OID do we have to use ?
* Serverfarm Usage
We would like to monitor the number of connections for each serverfarm and for each rserver. How is this possible ? Which OIDs do we have to use ?
Thank you in advance for your help.
05-15-2009 06:15 AM
Be aware that ACE has multiple CPU.
The OID is for the management CPU (config, probe,...) but not the CPU that actually switches the traffic.
CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.1 = INTEGER: 1
CISCO-PROCESS-MIB::cpmCPUTotal1minRev.1 = Gauge32: 17 percent
CISCO-PROCESS-MIB::cpmCPUTotal5minRev.1 = Gauge32: 16 percent
CISCO-PROCESS-MIB::cpmCPUMonInterval.1 = Gauge32: 5 seconds
CISCO-SLB-EXT-MIB::cslbxStatsCurrConnections.3 = Gauge32: 6 connections
CISCO-SLB-EXT-MIB::cslbxStatsFailedConns.3 = Counter32: 0 connections
CISCO-SLB-EXT-MIB::cslbxStatsL4PolicyConns.3 = Counter32: 0 connections
CISCO-SLB-EXT-MIB::cslbxStatsL7PolicyConns.3 = Counter32: 0 connections
cesServerFarmRserverTable - 1.3.6.1.4.1.9.9.470.1.1.3
05-26-2009 06:13 AM
Hi,
thank you for the reply.
So one can not get the usage of other CPU using SNMP ?
What about memory usage ?
From your answer I understand that we can only monitor the total amount of connections (cslbxStatsCurrConnections) in a context, but it is not possible to monitor the connections per realserver or per serverfarm. Is that correct ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide