cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
323
Views
0
Helpful
1
Replies

blocking a MAC Address

engineer_msu
Level 1
Level 1

Hi All,

I have a server which has two NIC cards I have to block one card.

Please advice me how can i block the MAC Address on the Switch.

Regards,

Mohammed Saleemuddin

1 Accepted Solution

Accepted Solutions

HI

You can put mac filter on switch ingress port connected to the server.

http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_example09186a0080470c39.shtml

http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_44_se/configuration/guide/swacl.html#wp1289037

Note - Your mac will be learned on switch but no traffic from this mac will be allowed.

Hope this helps.

pl rate if this helps.

View solution in original post

1 Reply 1

HI

You can put mac filter on switch ingress port connected to the server.

http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_example09186a0080470c39.shtml

http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_44_se/configuration/guide/swacl.html#wp1289037

Note - Your mac will be learned on switch but no traffic from this mac will be allowed.

Hope this helps.

pl rate if this helps.

Review Cisco Networking products for a $25 gift card