CCME GPickup

Answered Question
May 17th, 2009

Dear All,

I am running CCME 4.2. I only want to dial one extension number to receive group pickup for a number to extensions.

Regards,

Malik

Correct Answer by Adrian Saavedra about 7 years 9 months ago

Hi Malik,


You will need to configure the pickup-group command under all your ephone-dns.


For example:


ephone-dn 1 dual-line

pickup-group 30


ephone-dn 2 dual-line

pickup-group 30


ephone-dn 3 dual-line

pickup-group 30


...


ephone-dn dual-line

pickup-group 30


Then you can pickup any call ringing at any phone from any other.


Hope it helps!


Best regards,


- Adrián.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
tiger_401 Sun, 05/17/2009 - 14:00

thanks for your response...i will configure it and if there is any issue i will let you know...

tiger_401 Sun, 05/17/2009 - 22:02

Can anybody tell me how i can configure


"Call Pickup, a Single Group for All Cisco CME Phones"


Regards,

Malik.

Correct Answer
Adrian Saavedra Sun, 05/17/2009 - 22:32

Hi Malik,


You will need to configure the pickup-group command under all your ephone-dns.


For example:


ephone-dn 1 dual-line

pickup-group 30


ephone-dn 2 dual-line

pickup-group 30


ephone-dn 3 dual-line

pickup-group 30


...


ephone-dn dual-line

pickup-group 30


Then you can pickup any call ringing at any phone from any other.


Hope it helps!


Best regards,


- Adrián.

tiger_401 Sun, 05/17/2009 - 22:56

GREAT!!!!Thanks Mr. Adria. Really appreciate your support....

Regards,

Malik...

Actions

This Discussion