05-17-2009 08:43 AM - edited 03-15-2019 06:03 PM
Dear All,
I am running CCME 4.2. I only want to dial one extension number to receive group pickup for a number to extensions.
Regards,
Malik
Solved! Go to Solution.
05-17-2009 10:32 PM
Hi Malik,
You will need to configure the pickup-group command under all your ephone-dns.
For example:
ephone-dn 1 dual-line
pickup-group 30
ephone-dn 2 dual-line
ephone-dn 3 dual-line
...
ephone-dn dual-line
Then you can pickup any call ringing at any phone from any other.
Hope it helps!
Best regards,
- Adrián.
View solution in original post
05-17-2009 09:06 AM
Here is the link to CME PickUp feature:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1092675
Hope it helps you!.
05-17-2009 02:00 PM
thanks for your response...i will configure it and if there is any issue i will let you know...
05-17-2009 10:02 PM
Can anybody tell me how i can configure
"Call Pickup, a Single Group for All Cisco CME Phones"
Malik.
05-17-2009 10:56 PM
GREAT!!!!Thanks Mr. Adria. Really appreciate your support....
Malik...
05-17-2009 11:03 PM
Hey Malik,
You're welcome! :)
Glad to help a bit!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
