IOS XR Layer 2 internetworking and layer 2 local switching

Unanswered Question
May 18th, 2009

I have 12410 with iox 3.6.1 and sip 501 with spa-5GE I want to configure layer 2 vpns for internetworking and layer 2 local switching. I search in the command reference and I didnt find the connect command nor internetwork ip under the PW class. can any one tell me how to configure it

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Laurent Aubert Mon, 05/18/2009 - 17:45

Hi,

Here is an example for local switching:

RP/0/1/CPU0:router(config-if)#l2vpn

RP/0/1/CPU0:router(config-l2vpn)#xconnect group local

RP/0/1/CPU0:router(config-l2vpn-xc)#p2p ac1

RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#interface gi0/3/0/0

RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#interface gi0/3/0/1

RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#commit

RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#end

Any-2-Any connection type required 3.8

HTH

Laurent.

a_ossama Mon, 05/18/2009 - 23:20

thank a lot Laurent you helped me a lot. I searched a lot in cisco for any example with no hope. so the following is true

local switching supported for gigaeth

any to any local switching supported in 3.8

does also any to any between two different platforms ( XR and 7200) specificaly vlan on XR and atm on 7200 will require 3.8 also ?

thanks in advance

Actions

This Discussion