05-18-2009 03:27 PM - edited 03-18-2019 10:21 AM
Hello Team,
I was looking on the web and basically the UC520 FAQ and Datasheet agree that the only VWIC supported for Telephony purposes is the VWIC2-XMFT-T1/E1, but there's nothing about the old VWICs.
Unfortunately I don't have the all the equipment to test it out myself :(, so I'm wondering if someone has tried this hardware combination with success.
Thanks in advance.
Manny
Solved! Go to Solution.
05-19-2009 10:26 AM
Hi!
I would like to help, but I don't have the lab equipment. I'm not with the UC500 team :(, but if you are a partner and have a SBCS or Advanced UC specialization you can open a case online with the PDI Help Desk SBCS team at:
http://www.cisco.com/go/pdihelpdesk
Regards!
Teresa.
05-18-2009 04:33 PM
Hi!
There a limited number of VWIC / VICs that are supported on the UC520 at this time if you want to install it on the open slot.
2 port T1 cards are not supported AFAIK, only the ones listed under "Modular Support"
There's also a bug CSCsy58476 that mentions that the UC520 will recognize a VIC2-xMFT-T1/E1 module even though it is not supported (I know you didn't ask
about this one, but just FYI). Only the VWIC2-1MFT-T1/E1 is supported on the UC520 platform.
Hope this helps!
Regards,
Teresa.
If it helps, please rate :)
05-18-2009 08:21 PM
Hello Teresa!
Thanks for the response :), it is clear to me that the Cisco official standpoint is that only the listed hardware parts work on the UC520(meaning that the VWIC-2MFT-T1-DI should not work).
If you could, have the time and if it is no too bold to ask, I would appreciate if you could help me with the little lab recreation here. I believe you have the equipment I don't.
Otherwise I believe we are pretty much done and thanks again for the help and the extra information :).
05-19-2009 10:26 AM
Hi!
I would like to help, but I don't have the lab equipment. I'm not with the UC500 team :(, but if you are a partner and have a SBCS or Advanced UC specialization you can open a case online with the PDI Help Desk SBCS team at:
http://www.cisco.com/go/pdihelpdesk
Regards!
Teresa.
05-19-2009 10:45 AM
Hello Teresa,
Thanks a lot for the help and take care!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: