cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
315
Views
10
Helpful
5
Replies

ASA issue

anva12345
Level 1
Level 1

Hi all

I have firewall with three zones namely inside,outside and DMZ.On the DMZ we have webserver and static NAT is given on the firewall.From outside i can access the webserver using public IP.But from Inside i cannot access on Public IPs or any of Public IPs on our network.Is there any way to access our public IP from inside?

5 Replies 5

andrew.prince
Level 10
Level 10

You need configure a static nat on the inside interface for the DMZ server IP.

HTH>

Thanks Andrew for the quick response can u please give one example

I would try something like:-

static (DMZ,inside) <> <> netmask 255.255.255.255

HTH>

Thanks Andrew.but which internal Ip i should give because the server is in DMZ

OK - let me explain:-

static (DMZ,inside) <> <> netmask 255.255.255.255

(DMZ = Source Interface, inside = Destination interface) <> <>

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: