DRAM memory upgrade for VIP2-10, VIP2-15, CX-FEIP2-2TX, and CX-FEIP2-2FX

Unanswered Question
May 19th, 2009
User Badges:

I would like to know if is it possible upgrade memory in a CX-FEIP2. I think my Processor is using one of these part numbers: V2-10/15/FE2-UPG= or

VIP2-10/15/FE2-UPG.


Slot 5:

Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 1

Microcode Status 0x4

Master Enable, LED, WCS Loaded

Board is analyzed

Pending I/O Status: None

EEPROM format version 1

FEIP2 controller, FRU: CX-FEIP2-(2TX/2FX)=, HW rev 2.14, board revision C0


Serial number: 27702267 Part number: 73-1684-05

Test history: 0x00 RMA number: 00-00-00

Flags: cisco 7000 board; 7500 compatible

EEPROM contents (hex):

0x20: 01 20 02 0E 01 A6 B3 FB 49 06 94 05 00 00 00 00

0x30: 60 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

Slot database information:

Flags: 0x4 Insertion time: 0x2A1C (35w5d ago)

Controller Memory Size: 32 MBytes DRAM, 2048 KBytes SRAM <<<<<<<<<<-----------------------

Startup time: 2836 msec

PA Bay 0 Information:

Fast-Ethernet PA, 1 ports, 100BaseTX-ISL, FRU: PA-FE-TX-ISL=

EEPROM format version 1

HW rev 1.04, Board revision B0

Serial number: 27739883 Part number: 73-2570-02

PA Bay 1 Information:

Fast-Ethernet PA, 1 ports, 100BaseTX-ISL, FRU: PA-FE-TX-ISL=

EEPROM format version 1

HW rev 1.04, Board revision B0

Serial number: 27739635 Part number: 73-2570-02


I found the possible successor can be as follow:

VIP2-40 with MEM-VIP240-64MB-D or MEM-VIP240-128MB-D


VIP2-50 with MEM-VIP250-64M-D or MEM-VIP250-128M-D


Can these memories using in VIP modules be used in FEIP modules?


I will appreciate a lot if someone could send me an answer about this information.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion