cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
726
Views
0
Helpful
5
Replies

AS5300, E1 pri, no clock source internal

jmecklenburg
Level 2
Level 2

Hi NetPro

I have problem with a AS5300 and E1 pri interface, the AS5300 have 4 E1 pri contected and working but i need attach a another E1, but when i try to configure the clock source internal, the command it's no avalaible.

regards

fixie rider
5 Replies 5

paolo bevilacqua
Hall of Fame
Hall of Fame

Can you post "show controllers e1" and a console log of the clock options presented for the 5th controller.

thanks, I send a document.

fixie rider

Can you try configuring clock source line primary for the interface connected to master clock ?

And the console log unsuccesful configuration for a controller you want to use clock internal.

is not posible configure the clock

fixie rider

You should have mentioned that is a 5350, not 5300.

You need to configure you primary clock source first (dial-tdm-clock):

http://www.cisco.com/en/US/docs/routers/access/as5350xm/software/configuration/guide/54bas2.html#wp1055650

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: