Richard Burts Wed, 05/20/2009 - 03:40
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Fariborz


If you have changed the image name in flash you can use the show version command. It will certainly give you version information. I am not sure that it is possible to get the "real ios name" once you have changed the image name in flash.


HTH


Rick

iyde Tue, 05/26/2009 - 02:52
User Badges:
  • Silver, 250 points or more

Hi.

Regardless of what name you give the image file in flash, you will always have a line like this in the 'show version' output:

Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)


This tells that you run IP Services and your version is 12.2(35)SE5


HTH.

Actions

This Discussion