Solved: NetConfig

pxcamp19 · ‎05-20-2009

When I run a netconfig job for all the devices, the job hangs in pending status. Sometimes it gets half the devices done, sometimes the job never starts. Is there something we have to do to have netconfig run? Whether it is ADHOC or a defined task, the same thing happens. Any help would be appreciated.

yjdabear · ‎05-20-2009

If this is LMS 3.1 (I'm not sure about earlier versions), it's possibly one of the three bugs: CSCsv95235 CSCsw39641 CSCsw88378:

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd25f87

A patch for these bugs is available from Cisco TAC. Just make sure the xdi.jar has the correct checksum of 326986eef9c9e46801a8623014ddd07e.

View solution in original post

yjdabear · ‎05-20-2009

If this is LMS 3.1 (I'm not sure about earlier versions), it's possibly one of the three bugs: CSCsv95235 CSCsw39641 CSCsw88378:

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd25f87

A patch for these bugs is available from Cisco TAC. Just make sure the xdi.jar has the correct checksum of 326986eef9c9e46801a8623014ddd07e.

pxcamp19 · ‎05-25-2009

Thank you so much- this worked like a charm. My jobs are now successfully finishing-