I have a Pix515 with a WAN link to a remote office. The Pix has an ethernet port that plugs into a 3550 switch which is set a s a trunk. The WAN router is plugged into VLAN 7 (subinterface).
My LAN is on 192.168.3.x/24 and I need to have the translate to something else before it gets to the remote WAN (10.100.0.32/27) as they have this LAN used elsewhere. Can I get the pix to NAT my LAN to something else liek 192.168.90.x/24?
Pix config is attached