storm control

Unanswered Question
May 20th, 2009
User Badges:

question about storm control and the confiuration options which are;

Switch(config-if)#storm-control broadcast level ?

<0.00 - 100.00> Enter rising threshold

bps Enter suppression level in bits per second

pps Enter suppression level in packets per second

So it can be either a percentage or in pps.

If you set it as pps, is this pps coming into the inteface?

So if you do a show interface fa0/1 command does the pps from storm control refer to the 5 minute input rate??


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
rajinikanth Wed, 05/20/2009 - 23:37
User Badges:
  • Bronze, 100 points or more

pps - packets per second

Yes, Its packets coming into interface.

It Specify the rising and falling suppression levels as a rate in packets per second at which traffic is received on the port.




This Discussion