Using COR to Limit a lobby phone attached to an FXS port

Unanswered Question
May 21st, 2009
User Badges:

I have a lobby phone that is attached to an FXS port and want to use COR to limit the user to internal, 911 and local calling. Basically block LD. How do I attach the COR list to the FXS port? The examples attach it to an ephone-dn.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Fri, 05/22/2009 - 11:23
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Since you are not using the FXS port in SCCP mode, the simplest thing is to configure a voice translation-rule and translation-profile that rejects calls beginning with the LD prefix. You apply it directly under voice port.

Nicholas Matthews Tue, 05/26/2009 - 16:25
User Badges:
  • Red, 2250 points or more

If you want to use the example, just make this modification:

voice-port 0/0/0

station-id number 1234

dial-peer voice 1 pots

answer-address 1234

corlist incoming



This Discussion