05-22-2009 02:38 AM - edited 03-15-2019 06:08 PM
I want to know the archetecture used to configure a SIP trunk between CCM and softswitch.
It's CCM --(H323)--> Gateway --(SIP)--> Softswitch
Or CCM --> Softswitch
05-22-2009 04:23 AM
You can use:
CCM - h323 or sip trunk - GW(CUBE) - SIP trunk - softswitch
CCM - SIP turnk - softswitch probably not as CCM dosen't support any form of authenication on SIP trunks.
05-22-2009 01:19 PM
As per previous answer, use CUBE (an ABC) in between to do the security demarc and protocol conversion.
Config at
http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_example09186a00808ead0f.shtml
CH
05-26-2009 03:07 AM
Thanks for your help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
