Qos flow within 2960

Unanswered Question
May 22nd, 2009
User Badges:

Hi, when traffic flows from i.e. in to port 1 then internally to port 2. Where does qos take place? port 1 (ingress --> egress) --> port 2 (ingress --> egress).


jason

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Fri, 05/22/2009 - 07:00
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Jason


From port 1 to port 2 = ingress on port 1 and egress on port. Marking/classification and potentially queueing/policing is usually done on ingress, queueing/shaping on egress.


Jon

avtechs19 Fri, 05/22/2009 - 07:03
User Badges:

Thx for the reply. The first sentence 'egress on port' is that port 1 or 2?


thx jason

Jon Marshall Fri, 05/22/2009 - 07:13
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Jason


Apologies, doesn't make much sense without the port number :-)


It's meant to say "egress on port 2".


Jon

Actions

This Discussion