05-22-2009 10:52 AM - edited 03-15-2019 06:09 PM
Hi ,
I have CUCM Version 6.1(3) and i can;t find a way to dialing 0 from any phone and it's will be routed to the reception extn.
Any ideas ?
Thanks
05-22-2009 10:57 AM
Create a translation profile that translates 0 to the DN of the receptionist's phone.
Hope this helps.
Brandon
05-22-2009 11:03 AM
Hi Thanks For the reaply ,
I have must to using a Gateway to make a
translation profile , don't forget that is version 6.1(3) . there is not translation profile only route pattern .
But still it's don't working .
05-22-2009 11:04 AM
I should have said translation pattern not profile.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b03txpat.html
Hope this helps.
Brandon
05-22-2009 11:11 AM
OK , i saw it
Thanks Allot !!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: