05-23-2009 10:56 PM - edited 03-06-2019 05:54 AM
HI all,
Error on initialize VLAN database 1: VTP feature not yet initialized[OK]
Anybody know what this error means.
Device running WS-C2950G-48-EI in Transparent VTP mode. Help me how can I solve this problem.
Thank You,
Ramesh
05-24-2009 04:48 AM
post the ouput of "show vlan"
05-24-2009 04:57 AM
05-26-2009 03:59 AM
Since your vlan database has over 30 vlans and there are no issues, I would ignore the error.
HTH>
05-26-2009 07:32 AM
I would too, but sometimes this switch is malfunctioning, even I could not log-in the switch. the buffer log shows :
*Sep 9 23:29:49.894 NST: %SYS-2-MALLOCFAIL: Memory allocation of 259644 bytes failed from 0x803B719C, alignment 0
Pool: Processor Free: 0 Cause: Not enough free memory
Alternate Pool: I/O Free: 136388 Cause: Not enough free memory
05-26-2009 07:33 AM
how long has it been up for? sometimes a reboot fixes all!
05-26-2009 09:11 AM
Hi Andrew,
First time when I found this problem, it has been up since Sep 9.
Exactily sometimes a reboot fixes all the problem and start works like a normal switch.
Ramesh
05-26-2009 01:54 PM
Hi Ramesh,
I think your VLAN database is corrupt.
1. Delete the vlan.dat file
2. Enter the VLAN Database again.
3. Exit to save a new database.
See if this helps.
05-26-2009 10:25 PM
Hi Leo,
I will, but does this make permanent solution.
Ramesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide